BELLISIMA IVORY LIMESTONE

Bellisima Limestone Wall Cladding
Size: 12” x 24” x | 12” x 36” | Finish: Striated | Material: Natural Limestone

Bellisima Limestone Wall Cladding
Size: 8” x 18” x 3/4” | Finish: Striated | Material: Natural Limestone


taupe limestone - calatrava collection

Limestone Gray Calatrava _Antique-Brushed_600px-300x300.jpg

Calatrava Limestone

CALATRAVA LIMESTONE

Tile Size: 12” x 24”, 16” x 32”, 18” x 36”
Slab Size: 30 x 82 x 1-1/4" or 2"
Custom Finish Options: The following custom finishes are also available: Honed, Bush-hammered, Brushed. Contact us for additional information.
Application: Residential, Commercial, Exterior & Freeze/Thaw applications.


IMG_4742.JPG

BLACK CASTLE

Collection: Black Castle Limestone
Size: 16” x 24”
Edge Detail: Sawn Edge
Application: Commercial | Residential
Wall | Floor
Interior | Exterior.

Limestone Nero Hex 7.9 x 7.9 x 0.50- Domvs Surfaces.jpg

NERO LIMESTONE

Collection: Nero Limestone
Size: 7.9” x 7.9” x 0.5”
Edge Detail: Medieval
Application: Commercial | Residential
Wall | Floor
Interior | Exterior.

LIMESTONE RECOMMENDATIONS: All limestones will acid etch when exposed to acidic foods such as lemons or tomatoes. Most limestones have high absorption ratings and low abrasion resistance ratings. In general, light-colored limestone is difficult to maintain in flooring applications with heavier traffic, gray limestone tends to effloresce in wet areas, and black limestone tends to show more scratching.  Do not use limestone for kitchen countertop applications. • It is recommended to seal limestone prior to grouting or use. • Please check the absorption rating. and abrasion resistance rating. For limestone with a lower abrasion resistance rating, use walk-off mats at entrances and expect the material to patina rapidly. • Please use a grout that is similar in color to the stone to avoid a picture-frame effect.. To better understand which limestones may be used in wet areas, refer to the Usage guide. • Always use a neutral detergent to clean limestone. If maintenance is an issue, choose a limestone with a lower absorption rating and higher abrasion resistance. To reduce the appearance of staining, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.